📅 2026-11-08 yunlara
Hotel Furniture Specifications: An RFQ Checklist Illustration

Hotel furniture spec sheet a factory prices and a buyer inspects: room matrix, board grade, finish, hardware rating, fire standards, tolerances and packing.

In short

  • A hotel furniture spec has to let a factory quote and an inspector verify; "refer to drawing" does neither.
  • Name board grade, finish code, hardware brand and fire rating before the RFQ leaves your desk.
  • A room matrix by unit type is what makes the per-key price comparable across factories.

Most hotel furniture specifications arrive as three lines in an email: walnut, four-star quality, 240 rooms. The quotes that come back cannot be compared, and the first sample meeting turns into a negotiation nobody budgeted for. A usable hotel furniture specification is not a longer document. It is a document where every line answers a question the factory must answer before it can price.

Room matrix before product detail

Start with the room mix, not the product. A 240-key hotel usually has three or four room types, and each type carries different dimensions for the same item. A bedside unit at 450 mm suits a 1,400 mm bed; the suite at 1,800 mm needs 500-600 mm or the drawers stop opening past the mattress. List room type, quantity per type, and the dimensions for every item in that type. Factories price from this matrix, and it removes the most common source of change orders.

Carcass, board and blocking

Specify the board, not the colour. E1 or E0 grade, 18 mm for carcasses and 25 mm for tops and shelves carrying load, moisture-resistant board in bathrooms and mini bar bays, and where blocking is required for hinges, drawer slides and wall fixings. If the project is in a humid climate, say so explicitly: it changes the adhesive and the edge banding, and it is the difference between a wardrobe that survives three summers and one that lifts at the seams.

Finish and colour reference

Name the finish system (veneer, melamine laminate, PU lacquer or powder-coated metal), the sheen level (matte, satin, gloss), and a colour reference the factory can verify against — RAL, NCS or a physical master sample. Add the acceptable batch tolerance, typically Delta E under 2. Without a stated reference, colour drift between production batches is not a defect the supplier has to correct.

Hardware and function

Name the brand range or an equivalent performance level, then state the cycle rating: 100,000 cycles for drawer slides, soft-close dampers, and the load rating for pull-out shelves and luggage racks. For wardrobes, specify whether hangers run on a rail or a rail-and-shelf combination, because it changes the internal depth and the door type.

Fire, safety and compliance

Upholstered headboards and chairs need a named standard — BS 5852 or EN 1021 — with the test report supplied at sample stage. Fire-rated guest room doors must be specified as a set: leaf, frame, seals, closer and hinges certified together, because a partial assembly loses the rating. Glass in doors and tables carries the same class as the assembly it sits in.

Tolerances and inspection

State the tolerances you will inspect against, typically 2 mm on carcass dimensions and 0.5 mm on edge alignment, and the sampling plan — AQL 2.5 for major defects, 4.0 for minor, zero acceptance for structural and safety defects. Name the inspection points: incoming material, in-line assembly, and pre-shipment against the approved master sample.

Packing, room kits and documentation

Hotel orders should ship as room kits: each carton labelled with room number and install sequence, hardware bagged per unit, and a packing list that matches the room matrix. Include the HS code per line, the fumigation or heat-treatment requirement for solid wood, and the Incoterms. This section decides how many days of site labour the installation actually takes.

A specification that covers these seven sections fits on four pages. It is the difference between six comparable quotes and six quotes you have to re-interpret. Buyers who send it once usually keep it as the template for every hotel project that follows.

Related reading