📅 2026-11-20 yunlara
Minimum order quantities for custom hotel furniture Illustration

MOQ is set by material minimums and line changeovers, not by the factory being difficult, so a small project can often be absorbed into a larger run.

In short

  • Real MOQ drivers are veneer minimums, lacquer batch sizes and line changeover time.
  • Below 50 units per model per finish, expect a 30 to 50 percent unit price premium.
  • A combine-with-existing-run clause with colour batch approval is what makes small projects work.

A buyer with 40 guest rooms asks for a custom wardrobe and gets a MOQ of 100 units. The number feels arbitrary. It is not: it comes from a veneer minimum, a lacquer batch minimum and the hours lost when a line stops to change over. Understanding those three lets a buyer negotiate instead of complaining.

the real constraints are 30 to 50 sheets of board, 500 metres of a specific veneer, one lacquer batch of 200 to 300 square metres, and half a day of line changeover. Below 50 units per model, expect a 30 to 50 percent unit price premium.

Material minimums that bite first

Veneer. A mill sells a veneer flitch or a bundle, typically 500 metres minimum for a specific species and cut. If the project needs 320 metres, the rest sits in the warehouse and someone pays for it. Board is less of a problem at 30 to 50 sheets, because a factory that runs hotel work keeps common grades in stock. Hardware is usually fine; most fitting suppliers sell in boxes of 500 or 1,000, which covers a 40 room project for hinges and runners.

Why the lacquer batch matters

Colour. A lacquer is mixed in a batch, and two batches of the same RAL number can differ by 1 to 2 delta E. If a project needs a batch for 40 rooms, the factory either mixes a small batch with poor colour control or uses a full batch and wastes the remainder. Some factories will add a small MOQ surcharge for a colour match, which is cheaper than discovering a mismatch between room 1 and room 40.

The cost of line changeover

Half a day of setup, plus scrap on the first five to ten panels while the machines settle. On a 4,000 unit annual line, that is real money. It is also why a 40 room order placed in the same month as a 300 room order for a similar product often gets accepted at a lower MOQ: the changeover is absorbed.

Writing MOQ into the contract

Per model, not per project, and with an explicit exception clause. Say: MOQ 60 units per model per finish; orders below MOQ carry a stated surcharge; and the factory may combine the order with an existing run of the same finish, with the buyer's approval on colour batch. That last clause is what makes small projects workable.

How a small buyer lowers MOQ

Choose a finish already in production for another client, accept a stock veneer species rather than a specified one, take the standard door width instead of a custom one, and allow a single colour batch to cover the whole project. Each of those removes one of the four constraints. All four removed is how a 30 room project gets built at a sensible price.

What belongs in the MOQ clause? 1. MOQ per model and per finish. 2. Surcharge level below MOQ. 3. Whether orders can be combined with other runs. 4. Colour batch approval process. 5. Material substitution allowance, if any. 6. Delivery split for combined orders.

a factory that accepts a 20 unit order at normal price is either absorbing cost to win the relationship or planning to substitute material. Ask which one before the order is signed.

Frequently asked questions

What sets the real MOQ?

30-50 board sheets, a 500m veneer flitch, one 200-300sqm lacquer batch, and half a day line changeover; below 50 units per model expect a 30-50% premium.

Why does the lacquer batch matter?

Two batches of the same RAL differ by 1-2 delta E; a small 40-room batch gets poor colour control or wasted remainder.

How can a small buyer lower MOQ?

Take an in-production finish, a stock veneer species, standard door width, and a single colour batch covering the whole project.

Send your room count and specification to our team via contact us for a tailored quote and lead time.

Related reading