IllustrationWholesale buying is not cutting the retail price; it means matching your quantity to the factory production run and filling one container so fixed cost splits across every unit.
In short
- Wholesale price drops when the order fills a real production run, not when you ask for a discount on one unit.
- A 40HQ holds about 55 to 65 CBM; mixing casegoods, wardrobes and seating in one container lowers per-unit freight.
- Seal a sample before bulk release: the sample, not the quote, sets the standard for 300 identical units.
A buyer sourcing for a small chain asks three factories for the same 80-room package and gets quotes 40 percent apart. He assumes two are padding margin. More often the gap is what bulk meant to each one: a single unit, a shared production run, or a full container. Wholesale hotel furniture pricing sits in the third. The distance from the first to the third is the distance between retail and factory cost.
Wholesale is not bargaining the retail price down
A retail or small-batch quote already carries a premium for running your order alone: a line stops, changes over, and runs a small quantity that does not fill a lacquer batch or a veneer minimum. Wholesale means the factory places your quantity into a normal production run, alongside other hotel orders, instead of setting up for you alone. That is where the price comes off. It has little to do with how hard you negotiate.
What drives the minimum on any custom piece is covered in minimum order quantities for custom hotel furniture.
The quantity bands that move the price
Under 50 units per model per finish, expect a 30 to 50 percent unit price premium for the small run. At 50 to 150 units, a factory can often absorb the order into a larger run in the same month and charge closer to normal. At 300 units or more, you are buying near production-run pricing, and the question shifts from cost per piece to how the order packs into a container. These bands are rough; they move with board grade, color batch and how full the production calendar is.
Fill a container, do not order by the piece
A 40HQ holds roughly 55 to 65 CBM after packing. Casegoods, wardrobes and seating do not all take the same space, and a buyer who orders one category at a time leaves empty volume that still travels at full freight. Mixing categories in one container, so the box leaves near full, spreads ocean freight across every unit instead of over a few. Before quoting, ask the factory for packed CBM per item, not just floor size.
What a wholesale quote should include
Compare the line items, not only the headline unit price: board and veneer, lacquer batch, hardware, labor, packing, and loading. A low unit price that leaves out packing or export cartons usually reappears as a surcharge later. For a project purchase, a contract furniture manufacturer approach prices the whole set as a program rather than selling each item separately.
Seal the sample before bulk release
For 300 identical rooms, the standard is the sealed sample, not the quote on paper. Approve the finish, hardware and dimension on one sample, sign it off, and bulk production runs to that sample. Skipping this step is how room 1 and room 280 end up different shades. The process is detailed in hotel furniture sample approval.
What to hand the factory first
Send the room list with each configuration, the RAL or wood finish number, the required delivery date, and the destination port. A quote built from incomplete drawings comes back rough; a quote built from a clear list is one you can actually compare across factories.
If you are comparing factories on a wholesale program, start from how a custom furniture factory in China quotes production runs rather than retail items.